Naslednji opisi komponent in postopkov odtiskovanja za implantata Myriad-Snap™ in Myriad-Provi-snap™ so enaki, saj imata implantata enako platformo in kompatibilne komponente.
ODTISKOVANJE - Myriad-Snap™
 |
Impression procedures are recommended using the plastic snap on transfer cap that snugly fits over the ball head and onto the prosthetic platform. Standard impression procedures ensure that the transfer cap is locked into the impression on removal and the laboratory analog is simply repositioned into the transfer cap within the impression to produce a working model. |
|
The plastic impression transfer cap is snugly press fitted onto the implant. |
|
Impression material is syringed around the transfer cap and the impression tray seated in place. |
|
On removal of the impression tray the transfer cap is lodged in the impression. The snap laboratory analog is repositioned into the transfer cap assuring an accurate impression transfer of the implant to a working model. |
|
Soft tissue mask is applied around the neck of the laboratory analog, followed by a pour of dies stone to produce the final working model. |
LABORATORIJSKI POSTOPKI - Myriad-Snap™
Sledi prikaz laboratorijskega postopka izdelave celotne proteze na implantatih Myriad-Snap™ ali Myriad-Provi-snap™.
 |
 |
 |
| The working model with the transferred laboratory analogs in place. |
The Myriad-Snap™ housings with the O ring matrices pressed into place on the laboratory analogs. |
Before pressing the denture the undercuts should be blocked with wax exposing only the undercut on the housing to lock the housing into the denture base prior to acrylisation. |
 |
|
|
| The finished denture with the O-ring matrices polymeriz3ed into place. |
|
|
