KIRURŠKI POSTOPEK - PLUS


Na straneh, ki sledijo je korak za korakom opisan protokol za kirurško vstavitev implantata Myriad-Plus™ D4.5 L13.

 

 

 

Ko z pilotnim svedrom (D2.0mm) določite globino vrtanja, le-te ni priporočljivo več spreminjati. Z večjimi svedri se postopno širi mesto vstavitve implantata. Če je potrebno lahko z naslednjimi svedri korigirate usmeritev ali os vrtanja. Priporočena hitrost vrtanja z pilotnim svedrom je med 800-1000 RPM.

V video predstavitvi je prikazano pilotno vrtanje do globine 13mm, ker bo vstavljen implantat dolžine 13mm in premera 4.5mm.

 

 Following the pilot drilling upto a depth of 13mm the osteotomy site is progressively widened  with the D3.3mm drill upto the same depth.

 

 The osteotomy site is then prepared  with the subsequent D3.8mm drill in the sequence to the depth of 13mm.  Drill speeds recommended are 500-800 RPM.

 

 The final drill in the sequence D4.5mm is placed to a length of 13mm as required  to finish the osteotomy site for the implant to be placed. Drilling speed recommended here is between 500-800 RPM.

 

 The implant blister is peeled open to expose the Myriad-Plus™  implant that is housed in a titanium vial alongside the cover screw.  The Plus insertion adapter can be inserted into the torque ratchet or directly into the handpiece with which the implant can be directly lifted off from the packaging and delivered to the osteotomy site.

 

 The implant can be inserted/turned into place using the torque ratchet or the handpiece.  In case the handpiece is used it must be inserted upto the top microthread using the micromotor.

 

Zaključno privijanje je priporočljivo opraviti z momentno ragljo. Optimalen navor je med 35-45Ncm.

 

 The cover screw is now taken from the blister using either the hand screw driver or torque driver via the handpiece and screwed onto the inserted implant prior to closing of the flap.